Acetone-Activated Asset Tags: Application Guide

Acetone-activated tags require careful surface preparation and the correct application method. Always follow the instructions supplied with the tag and the relevant safety information for the solvent. Test compatibility before applying tags to a full asset batch. For product information, visit acetone-activated aluminium asset tags.

Confirm the surface is suitable

Identify the substrate and coating, then check the supplier’s compatibility guidance. Some plastics, painted finishes, coatings and sensitive surfaces can be damaged by solvents or may not form a dependable bond. If unsure, test on an approved inconspicuous area or choose a different fixing method. Do not apply solvent near heat, flame or ignition sources.

Prepare a clean work area

Work in a well-ventilated area and use the protective equipment stated on the solvent label and safety data sheet. Keep the product away from children and ignition sources, and store it as directed. Clean away dust, oil and loose residue with a method approved for that surface; allow it to dry fully.

Apply according to the supplied instructions

Use only the specified amount and timing for the tag adhesive. Position the tag carefully, press evenly and avoid moving it once placed. Do not assume that more solvent or more pressure will improve the bond. Allow the stated curing period before exposing the item to routine handling or cleaning.

Record and verify

Scan or record the tag ID as it is applied and match it to the asset record. Check that the code is readable and the tag edges are seated. If the surface is unsuitable, discuss alternatives such as a mechanical fixing or direct marking. Compare methods in our acetone-activated versus riveted tags guide.